Tenax Ager revitalizes and enhances the color of natural stone surfaces. Use the 1 Quart ager on your natural stone surfaces to give the stone a deep, rich appearance and protect the pores from absorbing potentially discoloring liquids that could stain the surface.
HOW TO APPLY
Using a paintbrush, cloth, fleece, or sponge applicator, apply Tenax Ager undiluted to a completely clean and dry natural stone surface. Allow the material to naturally absorb the Ager evenly. Within a few seconds of application, wipe off any Ager that was not absorbed into the natural stone material using a clean cloth or sponge. Avoid applying Ager in direct sunlight. Wait 24 hours after treatment for finished surface. In the case of treating natural stone surfaces that receive foot traffic, do not walk on treated surface for 4-6 hours after treatment.
BENEFITS OF AGER
Adding Ager to natural stone surfaces produces benefits and adds beauty to the stone. The following list enumerates some of the benefits of applying Ager to natural surfaces:
- UV Resistant
- Non Yellowing
- Stain Resistant
- Enhances Color Tone
- Helps Protects Against Graffiti
MATERIAL COMPATABILITY
Tenax Ager is a color and grain enhancer and sealer designed for adding beauty to all sorts of natural stone surfaces including the following materials:
- Marble
- Granite
- Limestone
- Sandstone
- Quartzite
- Travertine
- Agglomerate
- Rosso Verona
TECHNIAL INFORMATION
- Density at 25°C gr/cm2: 0.95
- Appearance: Opalescent Liquid
- Color: Colorless
WARNING: Tenax Ager does not provide anti-etch protection on marble surfaces. Use of acidic substances such as wine, tomatoes, citrus, coffee, etc. will etch the surface by creating a chemical reaction with eh calcium carbonate present in marbles. For etching problems use Tenax TeEtch
| 1 Quart of Product Coverage | ||
|---|---|---|
| Material | Approximate Coverage | Approximate Coverage |
| Honed Stone & Marble | 19-33 m2 | 203-356 ft2 |
| Polished Marble & Granite | 28-47 m2 | 305-509 ft2 |
